Daily maintenance of chain conveyor

Dec 17, 2024

Leave a message

The chain production line equipment is easy to clean, and the line body can be directly washed with water on the surface of the equipment (but it should be noted that the power part and the control part cannot be washed with water to avoid damage to internal components, electric shock, and accidents.) To maximize the service life of the equipment, maintenance and care are the key. Generally speaking, the motor of the power part needs to be replaced with oil in time after about one year of use to ensure that the motor is in the best operating state and reduce internal losses. Usually, after the chain production line equipment is used, the power should be turned off in time and the surface of the equipment should be cleaned for a period of time. When the equipment needs maintenance, it should be maintained by professional equipment personnel, and non-related personnel should not perform maintenance to avoid unnecessary economic losses and safety accidents. When the equipment fails, it should not be blindly inspected and repaired, and professional engineers should be asked to inspect and repair it.

Food Grade Curve Belt Conveyor 5

During the operation of the conveyor, the chain production line is subjected to various load shear effects of different properties and volumes, and is under extremely complex stress conditions. The most typical ways of damage to chain plate production lines are: wear of the working surface and edges; penetration, tearing and falling off caused by the impact of large pieces of rock; fatigue caused by repeated bending stress of the core through the flute and roller group; reduction and aging of the driving strength index under the effect of background media, etc.